Getting Started with LinkIt Smart 7688 Duo

@laurencehr wrote:

About This Project

First, you must to configurate the LinkIt on Station Mode, and connect this to your Private Wireless Network. For details see this project (mine) on Hackster:
https://www.hackster.io/LaurenceHR/getting-started-with-station-mode-of-linkit-smart-7688-duo-34c0f0

What's Connected

LinkIt Smart 7688 Duo

Scheduling

1. Enable Bridge
   For use LinkIt as a Arduino Yun you have to enable Bridge Function
   https://labs.mediatek.com/site/global/developer_tools/mediatek_linkit_smart_7688/training_docs/arduino/duo_work_as_yun/index.gsp
   

2. Add New Device on Cayenne (select Arduino Yun)

getting-started-cayenne-linkit-duo-001.jpg1262x678 142 KB

getting-started-cayenne-linkit-duo-003.jpg1262x678 189 KB

getting-started-cayenne-linkit-duo-002.jpg1262x677 153 KB

3. Upload Base Sketch

getting-started-cayenne-linkit-duo-004.jpg567x735 138 KB

4. Cayenne will recognize the board, rename the device.

getting-started-cayenne-linkit-duo-005.jpg1262x677 121 KB

5. Add new Widget: Ligth Actuator with Virtual Pin

getting-started-cayenne-linkit-duo-006.jpg1262x678 125 KB

getting-started-cayenne-linkit-duo-007.jpg1262x677 180 KB

6. Upload New Sketch

getting-started-cayenne-linkit-duo-008.jpg567x735 175 KB

7. Test Ligth Switcher

IMG-20161010-01386.jpg2048x1536 364 KB

IMG-20161010-01387.jpg2048x1536 369 KB

Photos of Project

IMG-20161010-01384.jpg2048x1536 582 KB

Posts: 1

Participants: 1

Read full topic