Unable to connect BMP180
@alansmarcer_md wrote: I have recently installed Cayenne. Before I installed, I connected my BMP180 sensor, and ran the following, “sudo i2cdetect -y 1” which listed the address as 77 (therefore the...
View ArticleStatus bar / Text feedback on dashboard
@Banana10 wrote: Hey I am working on a project that uses the cayenne app to connect my iPhone to a raspberry pi. A button on the app starts a program on my Pi. I would like to see the status of the...
View ArticleSending data From cayenne to 8266
@jameszahary wrote: Anybody tried sending data from cayenne to an 8266? You can send 1 bit through a button, and (i think) an integer through a slider, but is that it? I would like to send a couple of...
View ArticleClik here to view.
BME280 and SI7021 no longer display temp data MQTT
@tim_bauer wrote: Using a Raspberry Pi 3 Model B (Raspbian 9) I am using MQTT to send Temperature, Humidity, and Pressure (BME280) to Cayenne. This all worked great until recently and now neither my...
View ArticleClik here to view.
Trigger history not updating
@margettepv wrote: Noticed today that the trigger history isn’t updating. This for an Arduino Uno that I installed about a week ago. Both date and “ran # times” isn’t updating. The first trigger...
View ArticleTriggers not functioning
@fh1 wrote: Im using a LoRa device and want to send a mail by a trigger when LUX changes. Ive set a simple “Sensor above: 30” then notify and my mailaddress. I can see on the device when the LUX...
View ArticleClik here to view.
New board for Cayenne
@x-giorgio-x wrote: Hi peolpe I made a new card, compatible. link Posts: 1 Participants: 1 Read full topic
View ArticleCayenne LPP 2.0
@eptak wrote: Hi everyone ! Please find below an extract with some addition to our Low Power Payload format starting on section 3.3. Feel free to share any comment or contribute, and enjoy ! Eric 3....
View ArticleClik here to view.
K-type thermocouple and MAX6675 - temperature sensor
@tad.dvor wrote: Codes for different boards and shields. All codes only work with MQTT. ESP8266Shield.txt (3 KB) EthernetShieldW5100.txt (2.0 KB) EthernetShieldW5200.txt (2.3 KB)...
View ArticleTelegram apk
@pnav2v wrote: About This Project (general introduction, overall experience with Cayenne, why did you create this project??) What’s Connected (Hardware, sensors, actuators, device model, WiFi, etc.)...
View ArticleHttps://my.telegram.org/auth
@pnav2v wrote: https://my.telegram.org/auth?to=deactivate Posts: 2 Participants: 1 Read full topic
View ArticleClik here to view.
User Authorization
@pnav2v wrote: About This Project (general introduction, tell us your inspiration, why did you create this project??) What’s Connected (Arduino board, other MCU’s, sensors, actuators, etc.) Triggers...
View ArticleClik here to view.
BMP180 data logging errors
@brianhight.is wrote: Hi, I’ve been running a BMP180 on an Arduino Uno for several weeks and noted a significant logging fault. Very often at the top of the hour, the data trace will either increase...
View ArticleDesktop / mobile
@buquet wrote: I use a NodeMCU V3 From my computer I created 2 buttons that works well. I created 3 slider to drive a RGB led. It works from my computer but not from my mobile (android) or my...
View ArticleTrigger not functioning
@cameron.ndc wrote: Triggers that were working a 10 days ago (20 January 2018) are no longer functioning. A new trigger (if light low, then LED on) also does not function, even though the changing...
View ArticleMobile app reporting differently to web UI
@mark_lennan wrote: Why would my mobile app running on iOS 11 be reporting the Network Speed, CPU Temperature and amount of Processes differently to the Web UI? Everything else matches up. CPU, RAM...
View ArticleAB Electronics 1 Wire Pi
@reefclownfish wrote: Is anyone using the 1 Wire Pi from AB electronics https://www.abelectronics.co.uk/kb/article/1043/1-wire-pi I have it all working on my Raspberry Pi but Cayenne is not seeing any...
View ArticleClik here to view.
Full greenhouse irrigation system
@guilherme wrote: About This Project I have worked with Arduino for 3 years. Cayenne suits perfect to my project, so I developed a complete irrigation system for greenhouse. Brazil has become an...
View ArticleDevice not support - Help pushing data
@reefclownfish wrote: The device I am using (DS2482-100) is not currently supported in Cayenne (AB Electronics 1 Wire Pi - https://www.abelectronics.co.uk/kb/article/1043/1-wire-pi). However, I can...
View ArticleClik here to view.
BH1750/GY-30 Luminosity Sensor with Cayenne
@hanif_foyyos26 wrote: The connection is done via Raspberry Pi 3 Model B. This is done by me in my Final Year Project. The procedures are explained as below: Click the link below to open the Tutorial:...
View Article
