Clik here to view.
Gauge / Chart update Problem
@benjaminkessler wrote: I´m using an ESP and an Bosch BMP180 sensor to monitor our office enviroment over MQTT. Everything works, i can see the values and they are refreshing like a charm but when i...
View ArticleClik here to view.
IOS App wrong Icons
@yves.deschoenmaekers wrote: Gents, why does it come that the icons are not properly shown in the IOS app latested version 2.3. On the desktop version they are shown as a button, in the IOS APP...
View ArticleDisplaying a floating point value...without sending a floating point value!...
@tim2 wrote: Any brilliant ideas on how to send a floating point value (a battery voltage) with an Arduino when there isnt enough code space to convert it to a float? I’d rather have a display in...
View ArticleConfused on channels, do they need to be unique per device?
@compman723 wrote: Confused on how the channels work. I select a channel for a temp sensor and I can save but when I leave and come back to edit the channel is no longer set? Posts: 2 Participants: 2...
View ArticleAdd stuf to triggers
@t11 wrote: I’m on raspberry pi and I want to make a trigger a event that when switch 1 & 2 is off it turns on till switch 2 is on Posts: 1 Participants: 1 Read full topic
View ArticleTrying to register RAK 811 tracker & getting error
@ikilby wrote: Finally managed to get my RAK 811 trackernode working. I am trying to register it as a Cayenne LPP. When I enter my devices Dev_EUI it is telling me it is already registered. I thought...
View ArticleClik here to view.
Take picture when motion with Pi 3 and Agent 2.0 CayenneMQTTClient() and...
@svein.utne wrote: About This Project Using Raspberry Pi 3 and Python3 with Cayenne Agent 2.0 Want to monitor my sailbout, with temp, humidity, water level inside and picture if motion detected. If...
View ArticleCan not add MCP3008 to Latest Raspberry Pi added to Cayenne
@wolfman5 wrote: I am attempting to add an MCP3008 A/D to a new Raspberry Pi Zero W that I just download the Cayenne software to. When I get to the place where it asks which device will the MCP3008 be...
View ArticleMultiple devices from one LoRa application?
@todd.krein wrote: The way I finally got Cayenne to work with my TTN LoRa devices was to create an integration on my application with the same process ID as the ID on a device on my dashboard....
View ArticleCouldn't set up r-pi with cayenne
@prakashramamoorthy20 wrote: Thank you for taking the time to submit your bug/issue! Please use the points below as a guide when submitting. Device & model you are using (Ex: Pi 2 Model B or...
View ArticleClik here to view.
Cayenne_in error
@ogrevanje.ozbalt wrote: Hello. My problem is that i can’t get a value from the slider in my program. I’m using arnuino uno and ethernet shield W5100. image.png787x536 20.9 KB Posts: 2 Participants: 2...
View ArticleClik here to view.
Relay is not responding while it show on state in dashboard
@yogitachavhan26 wrote: Thank you for taking the time to submit your bug/issue! Please use the points below as a guide when submitting. Device & model you are using (Ex: Pi 2 Model B or Arduino...
View ArticleRelay oil tank counter to cayenne code conversion help
@cmg wrote: Hello we successfully connected our fuel counter to arduino and it counts the litres and works on serial monitor. I have converted the code to send to cayenne but having trouble can...
View ArticleGPS data missing
@c.mourtzios wrote: good evening to all i am sending Lora data (non-gps) from semtech IOT sever to cayenne without any problem from a Multitech mDotbox. when i try to send GPS data from semtech to...
View ArticleClik here to view.
NodeMCU esp8266 + BMP280/BME280
@michal.m-1990 wrote: Hi, im looking about code for my first project - i have Nodemcu esp8266 and some temperature sensor from China -...
View ArticleTrigger Update / Timeline?
@ddoumani wrote: Thank you for taking the time to submit your bug/issue! Please use the points below as a guide when submitting. Device & model you are using (Ex: Pi 2 Model B or Arduino Uno with...
View ArticleRestricting number of decimal places sent?
@tim2 wrote: Is there a way to restrict the number of decimal places that cayenne.virtualWrite sends? I am seeing it send three every time i send a float, and I would prefer only one to make the...
View ArticleAlarm system
@jayme_eduardoguimara wrote: hello everyone. Is it possible to build an alarm system with a siren and RFID keys with no Arduino, only using 5 PIR detectors a raspberry pi a Rfid Rc522 module, and...
View ArticleCan't setup MCP3008
@lindow.lemee wrote: hi ! i’ve got a problem whit cayenne ! i installed cayenne on my Raspberry Pi 3 (model b) and i want to add a new device (mcp3008) but i can’t select my Raspberry card in the case...
View ArticleSignal strength wifi
@zanni.robert wrote: Hello community. as part of a small project requiring a strong signal. For a NODEMCU how to insert the function RSSI. I tried without success. this part of code that does not...
View Article
