Clik here to view.
Air202 GSM - sending temperature, humidity, battery voltage and rssi to the...
@vanihada wrote: About This Project The script is designed for Air202 on the S6 board and the module version with the solar battery charging system (diagram on the attached photo). For the version...
View ArticleGraph issue iOS app
@dc.web wrote: For the last umpteen weeks the graphs in iOS app. (Temp widgets) are confusing. Some are left to right and some right to left. I.e. last hour - current time is left. Last day current...
View ArticleMonitor the state of a LED on another device
@jkryzak wrote: I want to make a window air conditioner wifi capable. I can wire into the existing switches with relays to turn it on/off and set the temperature up and down. Now I want to get...
View ArticleDownloads not working
@paul2 wrote: I have been using the download button in the data view (Windows) for quite a while. It’s always been a bit hit or miss and I’ve often had to retry several times to get the download to...
View ArticleAcrobotics ESP8266 remote monitoring
@jerrydyer wrote: Hi there I have spent hours trying to work out where I have gone wrong following the Acrobotics video, Remote monitoring with the ESP8266 (See my code below, I have added a serial...
View ArticleRaspberry Pi Connection With Cayenne API
@cagriserpin wrote: Hello! I’m trying to connect my Raspberry Pi with using Cayenne API. I’ve searched on the internet but I could not figure out how to connect. Please help me. Posts: 9 Participants:...
View ArticleIssue - Raspberry Pi Button Data Sending To Cayenne Using API
@cagriserpin wrote: Hi guys! I’m having problem with sending data to Cayenne. I’m using this code: https://www.instructables.com/id/Cayenne-Python-and-MQTT-Tutorials-Digital-İnput/ When I start the...
View ArticleSMS Problem
@cagriserpin wrote: Hello guys! I’ve created a button widget. It’s changing the led statement connected on my raspberry pi. It works fine but when I try to send SMS when button is on, it does not...
View ArticleOffline/online raspberry DHT22 every second
@raceableability wrote: Hi i have a raspberry and i installed a DHT22 i receive values normally but the device keep connecting/disconnecting all the time… can someone help? because of this problem i...
View ArticleDisplay a sensor as line chart and as a gauge
@energy.dch wrote: Hi All, I am new to Cayenne (and too much experience with traditional SCADA) I would like to display Humidity in multiple ways on my dashboard but I am limited to one display method...
View ArticleClik here to view.
All GET calls to API return error 500 now
@luisalonsosp wrote: Hi, I’m having a bit of a serious issue with the API. All of my GET requests are now returning error 500, “message”: “An unexpected error occurred”, regardless of where I’m making...
View ArticleHelp with a hydroponics project
@andrewjmavor wrote: Hey all! I’m just getting into working up a similar project but i am VERY green and hoping for some help and guidance. I have a small vertical farming system set up and and I’m...
View ArticleClik here to view.
How to connect 1000+ web apps to cayenne using Zapier
@shramik_salgaonkar wrote: In this topic, we will learn how to add 1000+ web app to cayenne using Zapier. a good start will be to first get familiar with Zapier by going through the docs....
View ArticlePort number(s) needed for School networks etc
@picaxe wrote: ? Port numbers needed for standard Pi Cayenne Dashboard and BYODevice projects ( MQTT out of a Pi serial Python Script ) I have the above typical setup working and pre tested and...
View ArticleTrying to update widget from curl
@bend94 wrote: Hi I am brand new in cayenne. I created a widget graph , and now i want to add each day the water consumption from cli (curl command) i am a little lost. I am able to read my...
View ArticleTrigger does not work with temperature
@reyiss wrote: T Trigger does not work it should turn on the light switch if the temperature was higher than 23 C But nothing happens. I have already tried several possibilities Posts: 1 Participants:...
View ArticleMy Analogue sensor trigger is not working in Cayenne
@muneerkt wrote: My Analogue sensor trigger is not working in Cayenne , I have 0- to 3.3 volt pressure connected to wemos D1 and receiving the analogue reading in cayenne , but when i set the trigger...
View ArticleEasy question for you! Please help me!
@jordan.baldrige wrote: Hello, I am as new as possible for this, so please don’t cut my throat! I have a Pi 3 B+. I’ve installed Raspbian, and I have successfully logged onto my account and I can see...
View ArticleClik here to view.
Cayenne and Openhab2 MQTT Integration!
@awesome42 wrote: I have been working on a project where i would like to control few things using ESP8266 and Cayenne MQTT. Previously few controls where added to Openhab2 which are running still but...
View ArticleRetrieve configuration from updated device agent
@ognqn.chikov wrote: Hello Everybody, I wasn’t use Cayenne for quite a while (more than an year!). I updated my raspberry pi agent and now I have new device added in the dashboard. The old device is...
View Article
