Mobile Data, Raspberry Pi with Cayenne Question
@lodgemoorlad wrote: Hi, I would like to set up some remote monitoring using Cayenne on a Raspberry Pi, which in turn would be connected to a MIFI router connected to the internet so that I can access...
View ArticleArduino programming problem 2
@Massimotruglio83 wrote: hi.I wanted to report the problem with arduino 2. any kind of loaded schetck, in the moment when the power supply is missing arduino does not restart and I am forced to...
View ArticleWemos goes offline
@3d-photo wrote: I’m using a Wemos D1 mini Pro to monitor the water level in a water tank using a float which just acts as a switch with the normal being pin low and everything works as intended...
View ArticleAdeunis Dry Contact Sensor Payload
@steven.bremner wrote: Hi There, I am pushing data from an Adeunis Dry Contact Sensor using The Things Network integration to Cayenne my Devices. Can you advise if the payload is being decoded...
View ArticlePython Script Stopping after a while
@kleynhansjacques wrote: Hi All, Currently tinkering to get the basics right before I dive deeper into the inner workings of Cayenne. I used the following as my “hello world” introduction to Cayenne:...
View ArticleI have a question about getting connected to the pi
@durapro2006 wrote: I tried figuring out how to use cayenne on a my raspberry pi a while ago, but never really got the hang of it. I thought I’d give it anothe go. I’ve installed cayenne to my iPhone,...
View ArticleClik here to view.
Trigger emails not arriving
@pmk.72q04 wrote: Thank you for taking the time to submit your bug/issue! Please use the points below as a guide when submitting. Device & model you are using (Ex: Pi 2 Model B or Arduino Uno with...
View ArticleNodered feedback connection
@Massimotruglio83 wrote: how can I tell if the device that I connected to nodered has blocked or is not sending data anymore or does not respond to the command? Posts: 1 Participants: 1 Read full topic
View ArticleMove device to other account don't work
@carol.richter wrote: (topic withdrawn by author, will be automatically deleted in 24 hours unless flagged) Posts: 1 Participants: 1 Read full topic
View ArticleAdd data to MCF88 LW06DAVK
@nicolas-yntec wrote: Hi everybody, I’m working on a DAVIS meteo station with an MCF88 LoraWan interface. Cayenne recognized my station and I can get data. I have an extra PM sensor on my station and...
View ArticleMagnetometer
@jeroenkl wrote: Is it possible to integrate a Magnetometer sensor according LPP protocol? The RAK7200 has a MPU9250 sensor: Acceleration(g) of X,Y,Z: 0.02,0.07,0.99 Gyro(degress/s) of X,Y,Z:...
View ArticleHow to read data from DS18B20 Temp Probe
@lodgemoorlad wrote: Hi, I have addedd a “waterproof” type DS18B20 temperature to my raspberry pi project, and its early days, but seems to work with Cayenne very well. What I can’t find out is, when...
View ArticleTime issues
@lodgemoorlad wrote: Hi, i have a problem where I have a temperature probe monitoring the temperature of my pond. The only time it seems to make sense as far as “real time” is concerned is when the...
View ArticleTurn on LED with one button
@dpozzi wrote: Hello friends, I am testing Cayenne, I started using an ESP8266-07 and a DHT11 sensor, I got it to work properly. Now I added two buttons to light two LEDs, these are connected directly...
View ArticlePublish and subscribe via AT command
@muthukumar7103 wrote: hello community team, I try to publish and subscribe my dashboard using BG96 module via AT command i try as below AT+QMTOPEN=0,“mqtt.mydevices.com”,1883 +QMTOPEN: 0,0...
View ArticleStep-by-step programming and how to plot data from a test measurement
@dieterheestermans wrote: Hi everybody I’ve got a question about Cayenne because I’m kinda new to this all. My goal for a school project is to remotely start a test measurement on a three fase...
View ArticleClik here to view.
Part 2 of Many DHT11 and some Math
@kleynhansjacques wrote: Hi All, This post will build on what I have learned from my previous post First Post - How to get a DHT11 running for longer than 6 hours So basically with help of Ninja...
View ArticleClik here to view.
Redundant Widgets
@lodgemoorlad wrote: Hi, I messed up my setup today, but managed to get things back on track, more or less, but I have a couple of minor issues that I cant seem to fathom out. My temprature probe...
View ArticleClik here to view.
Pca9685
@hunslirzomo wrote: When I go to add actuator and choose Generic and the PWM output then when i head to select the connectivity option then a red ban icon appears on the place where i had to make a...
View ArticleServo Motor controll
@hunslirzomo wrote: Looking to drive a servo motor (0 to 180 degrees) using a slider control. Can anyone share a tutorial on how to do this? Posts: 3 Participants: 2 Read full topic
View Article
