Trigger when RaspberryPi starts up
@walters wrote: I am using a Pi 3 and have a trigger set to turn a relay ON when the device is online. This was my thought to have in place so the relay is always on in case the Pi reboots or power...
View ArticleReed switch - pull up resistor in cayenne?
@tschwartzman wrote: Simple project - I have a magnetic reed switch (alarm sensor type) which I am monitoring via digital input. Connected to the RPi3 ground and GPIO 26. When the sensor is...
View ArticleProgramming ESP8266-12E with Arduino Compile Error
@modsbyus wrote: I have installed and imported the Cayenne library but keep getting the below error. I am using Arduino IDE 1.6.5.What am I missing here?...
View ArticleTrouble logging in to Dashboard
@don3 wrote: Hi there I can't seem to log into my Cayenne dashboard. Every time, I get stuck on a the redirecting URL page https://cayenne.mydevices.com/cayenne/track-signin It's been like this for a...
View ArticleEsp8266-12E Program wont run with Cayenne Library
@modsbyus wrote: I can program a simple blink sketch on my ESP8266 and it runs fine. When I load my basic Cayenne sketch the program will upload but wont run. I have Arduino IDE 1.8.3. I have tried...
View ArticleCayenne gets disconnected very frequent
@disha.karnataki wrote: About This Project I am connecting nodemcu with arduino for my project.As of now I am just connecting nodemcu and displaying various data values with virtualWrite() function in...
View ArticleConnecting button to ESP12E and sending information to cayenne (MQTT)
@claudio.ascensao wrote: Hello! i'm trying to use a esp12E to detect and send (via wifi) button change information to cayenne dashboard. when reading the cayenne examples the code is for other kind...
View ArticleOffline Trouble
@wmontg5988 wrote: Arduino Mega based PLCduino. wit wifi only. Unit shows offline periodically since 2 days ago. Reset and still not online. Serial monitor shows connected. Re-uploaded basic sketch...
View ArticleMore granular schedule - Currently 5 minute intervals
@a.js.mcd wrote: Hello, My friend and I are constructing a simple solenoid valve project for his irrigation system. During this we noticed that the scheduling can only be done in 5 minute intervals....
View ArticleClik here to view.
Release Notes June 23, 2017 (Dashboard Sharing, ESP8266 Support)
@rsiegel wrote: Release Notes June 23, 2017 New Features Dashboard Sharing! Share your Cayenne projects with others (either as view-only or with permission to change actuators) by using the new...
View ArticleDevice offline in cayenne
@riegosg wrote: Hello everyone.In recent days has had the disadvantage of displaying the devices (Raspberry pi 3) in the panel.They are suddenly out of line. I have checked that there are no Internet...
View ArticleMy two devices offline
@g-seis wrote: Hello my two arduino mega devices with ethernet w5100, appear offline. They are in a place that I can not restart. This week has happened to me twice. I do not know if it will be for...
View ArticleClik here to view.
Rpi new installation
@philippethibault wrote: hi therei got some lil prob with rpi zeroit was working fine but i do something ans need to re install jessie (not the lite)look at rpi os then saw new jessie, dlwnload and...
View ArticleClik here to view.
Lighting control using the Cayenne Dashboard and button
@tad.dvor wrote: Arduino UNO + W5100 + Button + LED Lighting control using the Cayenne Dashboard Button or using the button. 2017-06-25 13.08.56.jpg1280x720 281 KB Snímek obrazovky (5).png860x543 8.75...
View ArticleTrouble with turning off a pin using millis
@modsbyus wrote: I used the blink without delay example to help me write this. The idea is that I would click the widget in the dashboard on then off and let the code turn the pin off after a period...
View Article2 dashboard button switches for ESP8266 E12 module Bug?
@mohamedbinisa wrote: Device & model you are using : ESP8266 E12 module What dashboard are you using? (Web) i used this code to control the builtin LED of ESP8266 E12 module and every thing was...
View ArticleScheduling increments
@jon.parniawski wrote: Hi!After reading the release notes about the 5 minute increments, the end of the paragraph says all increments will be available...does this mean we will be able to schedule in...
View ArticleConvert general widget to specific type
@bennaim.lior wrote: when sending rewrite(..) function on node.js client, the dashboard shows a general widget, it will be good to: a.change the general widget to specific widget b.send in the rawrite...
View ArticleParticle Photon and DS18B20 Temp Sensor
@tech3 wrote: I have a project where I want to use the Particle Photon with a DS18B20 temperature sensor. Has anyone tried to make this combination work with Cayenne? I found instructions to setup the...
View ArticleCayenne LPP implementation NodeJS
@hallard04 wrote: Hi There,Is there any Cayenne LPP implementation in NodeJS ? I didn't found any but may be my search was not good ? thanks for any help Posts: 1 Participants: 1 Read full topic
View Article
